Product Special storage
Layered storage loading
10 sun hours
- No conventional reheating necessary
- Memory is charged to 100%
- Result: plus 20% Storage capacity
PV-Heat: Heating rod + powerReducer
Control of the heating elements depending on the power fed into the grid (thus no purchase from the grid – unlike other systems that switch depending on the PV power).
PV-Heat
Store your own electricity optimally & use it for yourself
Use of PV energy and electrothermal heat for
Single and multi-family houses with powerreducer & energy meter
All advantages at a glance
The electrothermal stations convert excess electricity from a photovoltaic system into heat. This is measured and controlled by the powerReducer( energy management system ). The stratified loading of the storage tank ensures optimum storage and use of the energy.
- Energy storage in thermal accumulators with significantly higher Storage capacities than in batteries. Storage capacity: 1000 liters, 20 at 70°C = 58 kWh
- Universal use – can also be retrofitted for post-EEG systems
- Self-consumption share of up to 90% due to priority household electricity and thermal storage/utilization
- Layer loading of Buffer storage with constant loading temperature 70°C
powerReducer- Increase self-consumption
The offered solution allows to measure the power fed into the grid and redirect it to a resistive load with a maximum power of 3 kW, increasing the self-consumption.
Self-consumption kit 3 kW
consisting of a 3-phase energy meter and power electronics for connection to a 1-phase standard 3 kW heating element, such as heating rods or the eTherm C3, optionally available with heating rod.
Product information / Prices
heatStixx HP ATS
heatStixx HP ATS
Hochleistungsfähige Makroverkapselungen gefüllt mit PCM
speziell geeignet für die Wärme- und Kälteanwendungen in
Pufferpeichern zur Erhöhung der Speicherkapazität.
erhältlich in verschiedenen Temperaturgleits:
von ATS -16 °C bis ATS +84 °C
Abmessung:
Ø 30 x 230 mm, Einbringung: durch 1 ½“ Standardmuffe
Optimale Kapazitätsnutzung
Anzahl: pro 1.000 l Speichervolumen ca. 2.400 Stk.
Hinweis:
- für die Bestellung geben Sie bitte die benötigte Anzahl der heatStixx in das Eingabefeld "Gesamt-Stückzahl" ein. Im Warenkorb können Sie dann die Gesamtstückzahl auswählen (z.B. 5 x 100 Stück)
- für eine bessere Bestellübersicht fügen Sie bitte die Produkte einzeln in den Warenkorb
- Andere Temperaturen auf Anfrage
- Die Gesamtkosten werden nach der Auftragsbestätigung gesondert per Mail aufgelistet.
Mindestbestellmengen:
Bei Kleinstaufträgen unter 2028 Stk.
werden 300 EUR netto als Mindermengenzuschlag berechnet.