Product Special storage
Layered storage loading
10 sun hours
- No conventional reheating necessary
- Memory is charged to 100%
- Result: plus 20% Storage capacity
PV-Heat: Heating rod + powerReducer
Control of the heating elements depending on the power fed into the grid (thus no purchase from the grid – unlike other systems that switch depending on the PV power).
PV-Heat
Store your own electricity optimally & use it for yourself
Use of PV energy and electrothermal heat for
Single and multi-family houses with powerreducer & energy meter
All advantages at a glance
The electrothermal stations convert excess electricity from a photovoltaic system into heat. This is measured and controlled by the powerReducer( energy management system ). The stratified loading of the storage tank ensures optimum storage and use of the energy.
- Energy storage in thermal accumulators with significantly higher Storage capacities than in batteries. Storage capacity: 1000 liters, 20 at 70°C = 58 kWh
- Universal use – can also be retrofitted for post-EEG systems
- Self-consumption share of up to 90% due to priority household electricity and thermal storage/utilization
- Layer loading of Buffer storage with constant loading temperature 70°C
powerReducer- Increase self-consumption
The offered solution allows to measure the power fed into the grid and redirect it to a resistive load with a maximum power of 3 kW, increasing the self-consumption.
Self-consumption kit 3 kW
consisting of a 3-phase energy meter and power electronics for connection to a 1-phase standard 3 kW heating element, such as heating rods or the eTherm C3, optionally available with heating rod.
Product information / Prices
kraftBoxx - Systemspeicher
kraftBoxx - Systemspeicher
Speicher für Heizung, Warmwasser, Wärmepumpe, Biomasse und Solar
PUFFERSPEICHER – WÄRME
Der Speicher ist optimiert für den Einsatz von PCM-Speicherelementen und besitzt viele Montagemöglichkeiten von verschiedensten Systemkomponenten, wie z.B. Heizkreisgruppen oder Frischwasserstationen.
• 2 x Lochblech für optimierte Strömungsverhältnisse
• 1 x Revisionsöffnung für heatStixx
• 8 x Anschluss 6/4“ • 2 x Anschluss 1” für Heizkreisgruppen • 1 x Entlüftung 1”
• Isolierung 100 mm Polyesterfaservlies
Alle Vorteile im Überblick
Überschüsse effizent speichern im kraftBoxx Hybridspeicher
- Zusätzliche Latentwärmekapazität nutzen
- 10 mal höhere Leistung im Vergleich zu herkömmlichen Latentspeichern
- 2 – 3 fache Speicherkapazität zu einem Wasserspeicher
- 10 mal günstiger als ein vergleichbarer Batteriespeicher
- Kapazität 30 kWh, 50 kWh und 60 kWh
kraftBoxx Systemkomponenten
Kapaziät erweitern mit heatSixx
Kapazität: kWh/1000
Faktor: Kapazitätserhöhung zu Wasser bei Speichernutztemperatur von 15 K (<=0 °C Vgl. zu Frostschutz), bei geringerer Temperaturdifferenz erhöht sich der Faktor
• ATS 31: Arbeitsbereich 30 bis 33 °C, Kap. 38, Faktor 2,2
• ATS 44: Arbeitsbereich 42 bis 48 °C, Kap. 42, Faktor 2,4
• ATS 50: Arbeitsbereich 46 bis 50 °C, Kap. 42, Faktor 2,4
• ATS 58: Arbeitsbereich 55 bis 58 °C, Kap. 40, Faktor 2,3
Heizkeis Gruppen
Nennleistung bei 2,5 m Restförderhöhe, ∆T 10K
• PGR S: 23 kW ohne Mischer
• PGM S: kvs 4,5: 20 kW
• PGM KR: kvs 4,5: 20 kW, elekt. Regelung
• VM2: 35 kW, 3 m³/h
• Eckkugelhahn Set1: für VM2 DN 20 oder 1 HK-Gruppe DN 25, ÜWM G1 - G1 1⁄2 IG
• Eckkugelhahn Set2: für HK-Gruppe DN 20, Achsabstand 125mm auf 100mm, ÜWM G1 - G1 IG
Frischwasserstation Gruppen
Zapfleistung 10-45/65 °C
• nemux T: 60 kW, 24,6 l/m, thermische Regelung
• nemux S: 60 kW, 28,7 l/m, elektronische Regelung
• nemux TM: 60 kW, 34,0 l/m, thermische Regelung
• nemux M: 60 kW, 41,0 l/m, elektronische Regelung
• Speicheranschluss Set1: zur direkten Montage an den Speicher
Zubehör für den Systemspeicher
• aero-fix: G 1⁄2 AG - G1 1⁄4
• Sicherheitsgruppe: ÜWM G1 - G1 AG
• Eckkugelhahn: ÜWM G1 - G1 AG
• MAG Anschluss: ÜWM G1 - G1 AG
PDF Download
>>> Preislisten >>> Produkt Factsheets >>> Montageanleitung